Saturday, November 30, 2019

Scarlet Letter And Crucible Comparison Essays - Film, Arts, Fiction

Scarlet Letter And Crucible Comparison When the topic of a Puritanical society is brought up, most people think of a rigorous, conservative, highly devout society. While this may have usually been the case, this was not always so. The Puritan society was also known not to act out of brotherly, "Christian love", but to cruelly lash out on those who sinned or were deemed unfit for society. Two works of literature that display both aspects of this society very accurately are The Scarlet Letter, by Nathaniel Hawthorne, and The Crucible, by Arthur Miller. The Scarlet Letter displays a society that treats two people very differently who commit the sin of adultery together. The woman, Hester Prynne, admits her sin, is forced to always wear a scarlet letter "A" on her bosom, and is ostracized from society. The man, Reverend Dimmesdale, who hides his sin from the world, is almost worshipped by the townspeople, but is filled with the dishonor of his action. Hawthorne illustrates how insensitive a Puritan society can be to those who admit their sinful actions. The Crucible is a play that reveals the story of the famous witchcraft trials in Salem, Massachusetts. In the story, Abigail Williams, the orphaned niece of the town?s minister, Reverend Parris, is the main person who accuses people of sending their spirits on her and the other girls. What starts as children dancing in the woods leads to the accusation and execution of many innocent people for witchcraft. The two works of literature, The Crucible and The Scarlet Letter have very similar qualities, including setting, difference, and general aspects of the characters, while there are also specific parallels between characters, such as Abigail and Hester, and Parris and Dimmesdale. The settings in both The Scarlet Letter and The Crucible are similar in many ways. The Scarlet Letter takes place around the 1640s, as The Crucible occurs in 1692. The time period is very important in both pieces, because it is a time of religious intolerance and a conservative attitude pervades in New England, where both works of literature take place. This Puritan setting is also very important in both works of literature. The reason behind the townspeople persecuting sinners is because of the Puritan beliefs of the time period. This is the driving force between the actions of the characters. The setting of a religiously intolerant village is also the main reason behind the conflict that lies in each plot. The conflicts in both works of literature are also similar. The same thing, the excessively devout town in which the setting takes place, causes them both. The conflict in The Scarlet Letter that occurs between Dimmesdale, Hester, and Chillingworth; is caused by the town?s intolerance for sinners. Hester?s life is spent in complete loneliness because of the way the town treats her. Chillingworth, Hester?s past husband, is like most of the townspeople, because he feels the need to punish and inflict pain on sinners, especially those who have personally harmed him. Chillingworth tries to gain revenge on Dimmesdale, the man who commits adultery with his wife. The town?s desire to seek out and personally condemn sinners is also the source of conflict in The Crucible. In The Crucible, the townspeople hunt out the witches in the community as an attempt to rid the town of evil. In both, the conflict is caused by the town?s self appointed right to rancorously persecute and punish anyone who is found sinning. The conflict is also similar because both towns are generally the same. They are both located in the same general area of America, which causes the people to have similar beliefs and traditions. This includes the townspeople, and the general aspects of the characters. The general aspects of characters are also similar in both The Scarlet Letter and The Crucible. Both have a main antagonist, who wishes to punish sinners. In The Scarlet Letter, this person is Roger Chillingworth, who wants to gain revenge on Dimmesdale, and in The Crucible, the antagonist is Abigail Williams, the girl who mainly accuses the people of being witches. In addition, both works of literature include ignorant townspeople who contribute to the main conflict. In The Scarlet Letter, these people are the ones who loathe Hester, but love Reverend Dimmesdale. The people in Reverend Parris? home while his daughter is sick, and the people in court in The Crucible are similar to the townspeople in The Scarlet Letter. Part of this is due to the Puritan setting. This affects the way the people think, and how they view

Tuesday, November 26, 2019

The Life of George Washington essays

The Life of George Washington essays Flexner, James Thomas. George Washington. Little. 1967 George Washington was one of the founding fathers of the United States of America. He served as commander-in-chief of the Continental army during the Revolutionary War, and later served as the first president of the United States. His thoughts and ideas helped mold the United States into the great country that it is today. George Washington was born on February 22, 1732 in Westmoreland County, Virginia. He was the eldest son of Augustine Washington and Mary Ball Washington. He received no formal education, but he read geography, military history, agriculture, deportment, and composition. Washington later developed a powerful and convincing style of speech and writing. He enjoyed sports and social occasions, and he later became a surveyor for landowners on the George Washington was elected president of the United States in 1789, and in New York City on April 30, 1789, he took the oath of office as President of the United States at age 57. He was extremely influential in the initial operation of the new government. After the ballot he wrote, "My movements to the chair of government will be accompanied by feeling not unlike those of a culprit, who is going to the place of his execution." Washington's task was to organize a government but also create a role for the highest officer of the new nation. Both tasks earned him One of Washington's first duties of office was establishing a cabinet. He appointed Alexander Hamilton secretary of treasury and Thomas Jefferson secretary of state. Washington allowed Jefferson to pursue a policy of seeking trade with European nations. Hamilton proposed important ideas such as a funded national debt and the creation of the Bank of the United States. The first United States census was take ...

Friday, November 22, 2019

Bell 412 Specs

This document is intended for the use of BHTI employees, and BHTI independent representatives (international dealers), and for prospective customers as an aid in determining estimated weight and performance of the helicopter when configured with equipment for specific missions. Disclosure, reproduction, or use of any material in this document by persons other than BHTI employees, and BHTI independent representatives, and prospective customers are forbidden without written permission from Bell Helicopter Textron Inc. The listings of Optional Equipment (â€Å"Kits†) are subject to revision and change, and also may be different for specific serial number helicopters or special custom configurations. Please consult the â€Å"Notes† column found in the optional equipment list tables for equipment compatibility. The continuing product improvement process of BHTI may cause some components, equipment, and compatibility to be changed or replaced. The specifications, weights, dimensions, and performance data shown in this document are subject to change without notice. 2012 Bell Helicopter Textron Inc. Bell, 206, 407, 407GX, 429, 412, Huey II, LongRanger and JetRanger are registered trademarks of Textron Innovations Inc. All rights reserved Specifications subject to change without notice. Bell 412EP Product Specification May 2012 412EP Product Spec 2012-02. indd 1 1  © 2012 Bell Helicopter Textron Inc. 6/5/2012 8:37:05 PM Page Intentionally Left Blank  © 2012 Bell Helicopter Textron Inc. 412EP Product Spec 2012-02. indd 2 2 Bell 412EP Production Specification May 2012 6/5/2012 8:37:05 PM Bell 412EP RELIABLE, RUGGED AND READY The Bell 412EP is the workhorse of the helicopter industry with a reputation of getting up and going to work every day in even the most extreme environments. †¢ Proven Pratt Whitney PT6T-3D Twin Pac engines with more than 25 million flight hours in more than 2,000 aircraft worldwide †¢ High retirement and overhaul intervals 5,000 hour drive system TBO 4,000 hour engine overhaul interval On-condition composite main rotor blades †¢ 25,000 hours between premature engine removals †¢ Excellent Category A / JAR OPS 3 capability †¢ Rugged fuselage with rollover bulkhead protection and rupture resistant fuel cells The data set forth in this document are general in nature and may vary with conditions. For performance data and operating limitations for any specific flight mission, reference must be made to the approved Flight Manual Bell 412EP Product Specification May 2012 412EP Product Spec 2012-02. indd 3 3  © 2012 Bell Helicopter Textron Inc. 6/5/2012 8:37:05 PM Specification Summary (U. S. Units) Weight lb Weight lb Empty Weight (IFR Std. Config. ) 1 6,964 Maximum Gross Weight (Internal) 11,900 Useful Load (Internal, IFR Std. Config. ) 4,936 Maximum Gross Weight (External) 11,900 Maximum External Load 4,500 Performance Summary: Takeoff, Gross Weight lb IGE Hovering Ceiling 9,500 10,500 11,900 ISA OGE Hovering Ceiling ft 17,400 14,300 10,200 ISA + 20  °C ft 14,400 10,900 6,200 ISA 10,400 5,200 10,300 6,050 (11,890 lb @ SL) ISA ft 14,000 11,270 7,270 ft 12,120 9,000 4,990 ISA Service Ceiling (AEO) 13,800 ft ISA + 20  °C FAA Take Off and Landing Limit, WAT 2 ft ISA + 20  °C ft 19,840 18,760 16,290 (continuous OEI) ISA ft 11,450 8,850 5,400 (30 minute OEI) 3 ISA ft 12,850 10,500 7,600 4,000 ft, ISA kts 132 130 125 n mi 366 364 358 kts 126 125 122 n mi 414 410 401 kts 131 130 125 Maximum Continuous Cruise (true airspeed) Cruise at Long Range Cruise (LRC) Speed Range 4 LRC Speed (average true airspeed) Range SL, ISA 4 LRC Speed (average true airspeed) Catagory A Takeoff and Landing Ceiling 4,000 ft, ISA ft 6,000 3,400 (11,580 lb @ SL) ft 3,750 1,200 (10,800 lb @ SL) SL, ISA hr 4. 0 3. 9 3. 6 4,000 ft, ISA Endurance at Loiter Speed 4 ISA ISA + 20  °C Elevated Helipad hr 4. 3 4. 2 3. 9 Uninstalled Thermodynamic Power Engine Ratings: (100% RPM) Engine Rated Power 2 x 950 2 x 900 Standard: Pratt Whitney PT6T-3D Twin Pac Takeoff (5 minutes) SHP Max Continuous Power SHP 2 x 950 2 x 800 OEI (2-1/2 minutes) SHP 1 x 1,140 1 x 1,133 OEI (continuous) SHP 1 x 970 1 x 1,024 OEI (30 minutes) SHP 1 x 1,066 1 x 1,079 OEI (continuous) SHP 1 x 950 N/A Optional: Pratt Whitney PT6T-3DF Twin Pac Transmission Ratings (100% RPM, at mast) Takeoff (5-minute) 1,370 SHP Max Continuous Power 1,110 SHP Single Engine Limited by Power Available Fuel (usable) Type Aviation Turbine Capacity 330. 5 US Gallons Note 1 IFR Standard Configuration includes all items listed in the Standard Configuration table of this document as well as twenty-five pounds (eleven kilograms) of engine oil. Ballast is not included in the standard configuration (ballast is a function of installed equipment). Note 2 With BLR FastFin ® System. Does not apply for Catagory B, 9-passenger seat configuration. The data set forth in this document are general in nature and may vary with conditions. For performance data and operating limitations for any specific flight mission, reference must be made to the approved Flight Manual  © 2012 Bell Helicopter Textron Inc. 412EP Product Spec 2012-02. indd 4 4 Bell 412EP Production Specification May 2012 6/5/2012 8:37:06 PM Specification Summary (Metric Units) Weight kg Weight kg Empty Weight (IFR Std. Config. ) 1 3,159 Maximum Gross Weight (Internal) 5,398 Useful Load (Internal, IFR Std. Config. ) 2,239 Maximum Gross Weight (External) 5,398 Maximum External Load 2,041 Performance Summary: Takeoff, Gross Weight kg IGE Hovering Ceiling ISA 4,309 4,763 5,398 m 5,304 4,359 3,109 ISA + 20  °C m 4,389 3,322 1,890 ISA OGE Hovering Ceiling m 4,206 3,170 1,585 ISA + 20  °C m 3,139 1,844 (5,393 kg @ SL) ISA m 4,267 3,435 2,216 ISA + 20  °C FAA Take Off and Landing Limit, WAT 2 m 3,694 2,743 1,521 Service Ceiling (AEO) ISA m 6,047 5,718 4,919 (continuous OEI) ISA m 3,490 2,697 1,646 ISA m 3,917 3,200 2,316 1,219 m, ISA km/h 244 241 232 km 678 674 663 (30 minute OEI) 3 Maximum Continuous Cruise (true airspeed) Cruise at Long Range Cruise (LRC) Speed Range 4 LRC Speed (average true airspeed) Range 4 LRC Speed (average true airspeed) SL, ISA 1,219 m, ISA km/h 233 232 226 km 767 757 743 243 241 232 m 1,829 1,036 (5,253 kg @ SL) m 1,143 366 (4,899 kg @ SL) SL, ISA hr 4. 0 3. 9 3. 6 1,219 m, ISA Elevated Helipad Endurance at Loiter Speed 4 km/h ISA + 20  °C Catagory A Takeoff and Landing Ceiling hr 4. 3 4. 2 3. 9 ISA Uninstalled Thermodynamic Power Engine Ratings: (100% RPM) Engine Rated Power Standard: Pratt Whitney PT6T-3D Twin Pac Takeoff (5 minutes) kW 2 x 708 2 x 671 Max Continuous Power kW 2 x 708 2 x 597 OEI (2-1/2 minutes) kW 1 x 850 1 x 845 OEI (continuous) kW 1 x 723 1 x 764 OEI (30 minutes) kW 1 x 795 1 x 805 OEI (continuous) kW 1 x 708 N/A Optional: Pratt Whitney PT6T-3DF Twin Pac Transmission Ratings (100% RPM, at mast) Takeoff (5-minute) 1,022 kW Max Continuous Power 828 kW Single Engine Limited by Power Available Fuel (usable) Type Aviation Turbine Capacity 1,251 liters Note 3 Increased capability available with optional Pratt Whitney PT6T-3DF (30 minute OEI Power Kit). Note 4 Standard fuel, no reserve. The data set forth in this document are general in nature and may vary with conditions. For performance data and operating limitations for any specific flight mission, reference must be made to the approved Flight Manual Bell 412EP Product Specification May 2012 412EP Product Spec 2012-02. indd 5 5  © 2012 Bell Helicopter Textron Inc. 6/5/2012 8:37:06 PM BLR Strake and FastFin ® Bell Helicopter has partnered with BLR Aerospace to provide its performance, safety and efficiency-enhancing FastFin ® system as a standard feature on new Bell 412EP aircraft orders. The system incorporates two parallel stall strips along the tail boom and a reshaped vertical fin. These modifications combine to optimize airflow around the tail boom, improving the handling, stability and lifting capacity of the Bell 412EP in all environments, especially high and hot conditions. The FastFin ® system is a combination of two separate modifications, one to the vertical fin and the other to the tailboom. For clarity, the term FastFin ® refers to the BLR modification that changes the shape and contour of the vertical fin. The term FastFin ® System refers to the combined FastFin ® and Dual Tail Boom Strake installation. The performance benefits of this system include increased tail rotor effectiveness and higher crosswind speed tolerance at hover in certain conditions. In conditions where the aircraft is currently tail rotor limited the FastFin ® System results in increased Weight-Altitude-Temperature (WAT) capability for takeoff, landing and in-ground-effect maneuvers, providing substantial improvement in useful load for hot/high operation (See performance chart below). 14,000 Be ll 41 M 2EP ax G wit Be ro h ss Fa ll 41 W stF 2E ei in gh TM P M tL S ax im ys G it tem ro ss W ei gh tL im it 12,000 Density Altitude (feet) 10000 8,000 6,000 4,000 2,000 0 8,000 9,000 10,000 Gross Weight (lb) 11,000 12,000 Bell 412EP WAT Improvement with FastFin ® System The data set forth in this document are general in nature and may vary with conditions. For performance data and operating limitations for any specific flight mission, reference must be made to the approved Flight Manual  © 2012 Bell Helicopter Textron Inc. 412EP Product Spec 2012-02. indd 6 6 Bell 412EP Production Specification May 2012 6/5/2012 8:37:06 PM Page Intentionally Left Blank Bell 412EP Product Specification May 2012 412EP Product Spec 2012-02. indd 7 7  © 2012 Bell Helicopter Textron Inc. 6/5/2012 8:37:06 PM External Dimensions LOW SKID GEAR Bell 412EP Low Skid Gear OPTIONAL HIGH SKID GEAR WITH AAI FLITESTEP ® Bell 412EP High Skid Gear Specifications subject to change without notice.  © 2012 Bell Helicopter Textron Inc. 412EP Product Spec 2012-02. indd 8 8 Bell 412EP Production Specification May 2012 6/5/2012 8:37:08 PM OPTIONAL EMERGENCY FLOAT GEAR WITH AAI FLOATSTEPâ„ ¢ Bell 412EP Float Kit OPTIONAL BLADE FOLDING KIT DIMENSIONS Minimum Hanger Size* Rotor Not Folded 33. 0 ft x 49. 6 ft (10. 1 m x 15. 2 m) Minimum Hanger Size* Rotor Folded 9. 5 ft x 55. 8 ft (2. 9 m x 17. 1 m) *Allowance should be made for high skid gear, ground wheels, emply fuel condition and door lip when considering hangar door width and height Specifications subject to change without notice. Bell 412EP Product Specification May 2012 412EP Product Spec 2012-02. indd 9 9  © 2012 Bell Helicopter Textron Inc. 6/5/2012 8:37:10 PM Bell 412EP Seating and Interior Trim Choices Crew Seats Two individual energy attenuating seats, fore/aft and up/down adjustable, each equipped with seat belt, double strap shoulder harness and inertia reel. Available with Grey, Blue, Red, or Tan upholstery which will match that selected for the cabin. Passenger Seats 13 seats offered in three options. (NOTE: Seating option 1 meets the criteria required by FAA regulations for installation in U. S. registered helicopters. Seating Options 2 3 require the addition of the STC Alpine 412 Passenger Shoulder Harness Kit for installation in U. S. registered helicopters. ) 1) Standard Seating Fabric covered high-backed folding seats with individual seat belts and single strap shoulder harness and inertia reel, arranged with one row of four (two 2-place benches) forward facing seats, and one row of five forward facing seats, and two outward facing two place benches (one on either side of the transmission). Available with Grey, Blue, Red, or Tan upholstery with Black seat belts. Seats are are also available in all vinyl at additional cost. (210. lb [95. 7 kg] included in the standard configuration weight. ) STANDARD SEATING (Shown with standard interior trim and floor covering) SEATING OPTIONS 2 AND 3 NOT ILLUSTRATED 2) Utility Seating Available for U. S. registered helicopters ONLY with addition of STC Alpine 412 Passenger Shoulder Harness Kit. Nylon covered bench type seating arranged with one row of four rearward facing seats (behind the crew seats), one row of five forward facing seats (in front of the transmission), and two outward facing two place benches (one on either side of the transmission). Each seat has an individual seat belt. Available in Tan or Black. The Utility Seating decreases the standard configuration weight (-93. 3 lb [-42. 3 kg], with Alpine Shoulder Harness -59. 5 lb [-27. 0 kg]). 3) Cushioned Utility Seating Available for U. S. registered helicopters ONLY with addition of STC Alpine 412 Passenger Shoulder Harness Kit. As in 2) above with the addition of fabric covered cushions, available in the same colors as the Standard Seating. The Cushioned Utility Seating decreases the standard configuration weight (-81. 1 lb [-36. 8 kg], with Alpine Shoulder Harness -47. 3 lb [-21. 5 kg]). Specifications subject to change without notice.  © 2012 Bell Helicopter Textron Inc. 12EP Product Spec 2012-02. indd 10 10 Bell 412EP Production Specification May 2012 6/5/2012 8:37:10 PM INTERIOR TRIM CHOICES 1) Standard Interior Trim The Standard Interior Trim is provided as a NO COST OPTION, but is not included in the Standard Configuration Empty Weight. Included are: Plastic closeouts on upper sidewalls, window reveals, and cabin headlin er; Padded vinyl covering the floor and lower door panels; Lower aft bulkhead covered with padded vinyl blankets. The hard plastic headliner and closeouts are off-white in color, and the padded bulkhead blankets and floor covering are color coordinated to match the seat color selection. The Standard Interior Trim increases the standard configuration empty weight (165. 7 lb [75. 2 kg]). 2) Utility Interior Trim The Utility Interior Trim consists of: Light beige vinyl covered headliner and bulkhead blankets; Doors painted light beige; Floor painted brown. The Utility Interior Trim is included in the standard configuration empty weight (33. 3 lb [15. 1 kg]). CUSTOMIZED SEATING [Example] Customized Seating Custom designed interiors are available from aircraft completion centers to meet the needs of Corporate or Emergency Medical Service customers. Specifications subject to change without notice. Bell 412EP Product Specification May 2012 412EP Product Spec 2012-02. indd 11 11  © 2012 Bell Helicopter Textron Inc. 6/5/2012 8:37:10 PM Standard Configuration (Items Included In List Price) AIRFRAME TRANSMISSION/ DRIVE SYSTEM Aluminum alloy fuselage (over 240 ft3 [6. 8M3]) loading space Glass windshields Main rotor transmission with 4 chip detectors/2 debris collectors Tinted overhead windows Vibration isolation / suspension mounts (4) Dual windshield wipers Main Lift link (single point suspension) Fresh air ventilators with adjustable outlets (8 cockpit and 12 aft cabin) 42? gearbox (sight gage and magnetic drain plug/chip detector) Bleed air heater and defroster with air noise suppression 90? gearbox (sight gage and magnetic drain plug/chip detector) Cargo tie-down fittings (51 aft cabin floor) Hydraulic pumps for controls (2 independent systems) Map and data case Transmission oil cooler Cabin fire extinguisher (2) Swingout jettisonable doors (2 for forward cabin) POWER PLANT Sliding doors (2 for aft cabin access with 2 emergency exit panels on each door) Automatic governors (2) Pratt Whitney of Canada PT6T-3D â€Å"Twin Pac† (1800 SHP) Swingout panels for extended access to aft cabin (2) Magnetic chip detectors Fixed step on skids for entry to forward cabin (2) Torque limiter Fuel System (330. 5 US Gal [1251 liter] usable, rupture resistant cells and breakaway vent fitting) Retractable steps for aft cabin access (2) Baggage compartment in tail boom (over 28 ft [0. 8M ], 400 lb [181kg] capacity). 3 3 Pumps on engines and submerged in fuel tanks Skid-type landing gear with replaceable wear shoes Fuel filter assembly Mooring and jacking fittings (4) Oil coolers (2) External attachment fittings (16) Fire detection system (2) Semi-monocoque tailboom Fire extinguisher system (2) BLR Strake and FastFin RPM warning system  ® Elevator (airspeed / spring-cartridge controlled) Hinged cowling Tail skid Starter-generators (2) Cargo hook provisions Power turbine RPM control actuators AUDIO Combining gearbox with chip detector Two station aft intercom system w/crew interface Separate firewall protection for each engine ROTORS CONTROLS Overriding clutches (2) Soft-in-plane flex beam hub with four fiberglass blades Extended Engine Exhaust Deflectors Main rotor droop restraint COMMUNICATIONS NAVIGATION Pendulum vibration absorbers 720 Channel VHF rec/trans transceiver (KTR-908) Semi-rigid, two bladed all-metal tail rotor VHF antenna All controls hydraulically boosted (dual systems for main rotor) 2 Headsets (pilot copilot) Force trim system and artificial feel (electrically set) 2 Intercomunication Panels (ICS) (pilot copilot) Dual controls Emergency Transmit Switch Cyclic stick centering Horizontal Situation Indicator RPM governor selector control Attitude Director Indicator Manual engine torque matching and trim Attitude and Heading Reference Systems (2) Dual Digital Three axis AFCS (2 flight control computers) Cockpit voice recorder provisions Rotor brake Specifications subject to change without notice.  © 2012 Bell Helicopter Textron Inc. 412EP Product Spec 2012-02. indd 12 12 Bell 412EP Production Specification May 2012 6/5/2012 8:37:10 PM Standard Configuration (continued) FLIGHT ENGINE INSTRUMENTS FLIGHT ENGINE INSTRUMENTS (continued) Flight Director Nav Coupler (3-axis) Master warning lights on the instrument panel draw attention to: Free air temperature indicator RPM Pitot static system with electric pitot heat Eng 2 Out Eng 2 Fire Eng 1 Out AL-300 Data Display Eng 1 Fire Baggage Fire Cyclic Radar altimeter #1 Over torque centering Altimeter (barometric) (mast) IFR EQUIPMENT Clock, digital quartz chronometer Co-pilot clock Hourmeter Distance Measuring Equipment (DME) (KDM-706) Magnetic compass, pilot’s standby IFR FAA kit Airspeed indicator Automatic Direction Finder (ADF) (XDF-806) Rate of climb indicator Nav receiver #1 VOR/LOC with HB/HSI (KNR-634) Turn and slip indicator Nav receiver #2 VOR/LOC with HSI (KNR-634) Triple tachometer (rotor and engines) VHF-AM Comm #2 radio (KTR-908) Dual hydraulic press/temp indicator (2) Transponder (MST67) Gas producer tach indicator (2) Co-pilot instruments (FAA) Triple torque indicator (Eng 1, Eng 2, mast) Standby attitude indicator Engine oil-temp/press indicator (2) ELECTRICAL Turbine inlet temperature indicator (2) Generator (2) (30 volt, 200 ampere DC startergenerator derated to 150 amperes) Fuel pressure indicator Transmission oil-temp/press indicator Inverters (2), (450 volt ampere single phase, solid state) Dual DC and AC voltmeters Nickel cadmium battery (40 ampere hours) Dual DC loadmeter Battery over-temp warning Fire detection warning (3) Generator voltage regulators Combining gearbox oil-temp/press indicator Instrument (integral) lights (white) Flight data recorder provisions Navigation lights Caution Warning System Master caution light on panel draws attention to the pedestal mounted annunciator panel when worded segments illuminate: Landing light-retractable Anticollision light (2) Engine oil press (2) DC generator (2) Tritium lighted emergency exit signs Trans oil press Gen overheat (2) Cockpit lights (2) Trans oil temp AC inverter (2) Dome lights (3) Comb box oil press External power External power receptacle Comb box oil temp Battery switch Twin ignition and starting systems Chip detectors (5) Battery temp Seat belt sign Fuel boost (2) Hydraulic Passenger step lights Fuel filter (2) Door locks Baggage compartment light fire sensor Fuel valve (2) Heater Utility cabin lights (removable) Fuel low (2) Part sep off (2) Fuel X feed Rotor brake (2) PAINT Emerg gov manual (2) Caution panel Markings for high visibility M/R blades (white orange) Specifications subject to change without notice. Bell 412EP Product Specification May 2012 412EP Product Spec 2012-02. indd 13 13  © 2012 Bell Helicopter Textron Inc. 6/5/2012 8:37:10 PM Standard Configuration (continued) MISCELLANEOUS Covers, tail pipe, turbine air inlet, and pitot tube Flight bag Ground handling wheels, hydraulically activated Manuals: Aircraft log, Engine log, Engine operations, Flight, Maintenance Overhaul Manual, Illustrated Parts Catalog Tie-down assemblies, main rotor tail rotor INTERIOR TRIM Choice of Standard or Utility Interior Trim. Standard; Rigid three-piece headliner in cabin, padded iberglass floor covering, bulkheads, trimmed with cream-colored plastic and color-coordinated vinyl coated fiberglass, cabin doors trimmed with plastic, special soundproofing, seat upholstered with foam and fabric. Selection of fabric colors. Not included in Standard Configuration Weight, increases empty weight 165. 6 pounds (75. 1 kilograms) when installed. Utility; Be ige soundproofing blankets on bulkheads and overhead; doors painted beige, floor painted brown. Included in Standard Configuration Weight (approximately 32. 6 pounds, 914. 8 kilograms). Specifications subject to change without notice. 2012 Bell Helicopter Textron Inc. 412EP Product Spec 2012-02. indd 14 14 Bell 412EP Production Specification May 2012 6/5/2012 8:37:10 PM Page Intentionally Left Blank Bell 412EP Product Specification May 2012 412EP Product Spec 2012-02. indd 15 15  © 2012 Bell Helicopter Textron Inc. 6/5/2012 8:37:10 PM Optional Accessories [Kits listed below are compatible with the FAA IFR 3-axis / non-EFIS configuration except as individually noted] Additional kits and STC items may be available for factory installation. Please consult sales or contract personnel regarding special needs prior to selection of final configuration. Wt (lb) Wt (kg) Notes 11. 7 5. 3 1, 2 FIXED STEP RIGHT HAND 11. 6 5. 3 1, 2 HEAVY DUTY HIGH SKID GEAR w/o STEPS 18. 5 8. 4 1, 3 HEAVY DUTY HIGH CROSS TUBES FOR EMER. FLOATS 3. 8 1. 7 EMERGENCY FLOATS (provisions) 51. 0 23. 2 EMERGENCY FLOATS /RESERVOIR NOSE 97. 5 44. 2 4 EMERGENCY FLOATS (L. G. w/ FLOATS PWR STEPS) 168. 8 76. 6 1, 4 HEATED WINDSHIELD 9. 8 4. 4 1 EXPANDABLE BOLTS MAIN ROTOR 3. 0 1. 4 FUEL KIT MANIFOLD DRAIN 0. 3 0. 1 Kit Description AIRFRAME FIXED STEP LEFT HAND 9 CELL FUEL SYS 4 -16. 1 -7. 3 SEAT BELT SIGN STD INTR 0. 3 0. 1 SEAT BELT SIGN DLX INTR 0. 3 0. 1 AUX FUEL PROVS 5. 4 . 5 5 AUX FUEL, 16. 3 GAL LH 20. 2 9. 1 5 AUX FUEL, 16. 3 GAL RH 20. 2 9. 1 5 AUX FUEL, 81. 7 GAL LH (REQUIRES REMOVAL OF 2 OUTBOARD-FACING PAX SEATS) 50. 3 22. 8 5 AUX FUEL, 81. 7 GAL RH (REQUIRES REMOVAL OF 2 OUTBOARD-FACING PAX SEATS) 50. 3 22. 8 5 5 INDICATOR, FUEL QTY, AUX FUEL -0. 1 0. 0 TOLERANT FUEL 98. 5 44. 7 EFIS (ELECTRONIC FLIGHT INSTRUMENT SYSTEM) 113. 4 51. 4 1, 6 4-AXIS D DAFCS W/ DUAL FLIGHT DIRECTOR 26. 4 12. 0 7 PRIMUS 700 WEATHER RADAR 49. 1 22. 3 7 PRIMUS 700 WEATHER RADAR W/ EFIS 54. 6 24. 8 7 ENCODING ALTIMETER 0. 1 0. 0 1, 7 RADAR ALTIMETER #2 12. 2 5. 6 7 CABIN PA SYSTEM (NON-EFIS)

Wednesday, November 20, 2019

Episode Analysis Essay Example | Topics and Well Written Essays - 500 words

Episode Analysis - Essay Example The Host, Dr. Richard Jackson, MD, MPH is a pediatrician by profession, worked with the CDC before becoming chair at the UCLA department of health Sciences. Jackson believes that America was built in a manner that did not cater for the health needs of people. Doing the research in the environment and human health, Richardson realized that people are not doing enough to realize what effects in the environmental are affecting their health. The author developed the TV series and wrote the book as a step to help create awareness on the effects the current environment people have created has on health. In the episode, the narrator provides information on the relationship between obesity and Type 2 diabetes. People become obese mainly as a result of unhealthy lifestyles. As a result of obesity, there are very high chances of such an individual to develop Type 2 Diabetes. According to CDC (2014) children experiencing obesity have higher likelihoods of developing pre-diabetic conditions. A similar research found a relationship between obesity and Type 2 Diabetes in Norway (Hjartaker, Langlesh, & Weiderpass, 2008). Most public health problems facing the American Society is related to their lifestyles. The most common public health hazard is the dependence of Americans on cars. The distance between home, shopping mall and the workplace is big to the extent that many people have to commute every day. People spent many hours driving thus reducing their time to exercise. In addition to the lack of exercise, dependence on fast foods is another health hazard facing public health and the American community. Unfitness and eating of junk food is the main reason explaining the high rate of obesity among Americans (Jackson, 2013). Poor urban planning, Poor eating habits and lifestyle are some of the factors resulting to increased rates of chronic diseases among most people. However, according to

Tuesday, November 19, 2019

Innovation and Change Essay Example | Topics and Well Written Essays - 3250 words - 1

Innovation and Change - Essay Example Legitimate innovations are not always the commercialisation of a significant advance in product concept, but can be the process of making enhancements to an existing product. Beacham (2006, p.9) reinforces that innovation is â€Å"the successful exploitation of new ideas†, meaning that specific business processes or management ideology can be representative of legitimate innovation which radically or incrementally change the methodology by which a business improves itself. The end result of innovation as a new idea, rather than a radically exclusive and exceptional product development, is being able to differentiate the innovative firm from its competitor base. For the sake of argument, it should then be recognised that genuine innovations involve making non-replicable changes to business strategy, service delivery processes, internal cultural dynamics both professional and social, improving functionality through software technology implementation, or blending existing technol ogies to create greater value for the firm in a way that has not been conceived of by rival firms. When attempting to determine whether SMEs are better able to innovate than larger organisations, it is necessary to clearly define the concept of what actually constitutes an innovation. An initial assessment of innovation, using the premise that a legitimate innovation is solely related to radical product development, would seem to point toward a larger organisation being more equipped to provide innovation than their smaller business counterparts due to higher capital availability, more labour and divisional support, and more refined manufacturing capacity. Taking into consideration the tangible definition of innovation, involving a variety of conceptions not always related to product, it is actually much more realistic to believe that the SME is much better equipped to provide innovation than the larger corporation. This essay describes the characteristics of the SME that actually m ake innovation more easily achievable than larger businesses, including an emphasis on leadership, cultural development, the political hierarchy, the nature of SME team functioning, organisational structure and managerial prowess in understanding the relationships between inputs and outputs that assist in sustaining the small to medium enterprise. The political hierarchy and business culture In order to successfully innovate, it is necessary to transform tacit knowledge into explicit knowledge within an open culture environment. Tacit knowledge is highly specialised, consisting of expertise that is not easily translatable and transferrable to individuals within the organisation that do not maintain similar expertise. Explicit knowledge is generally defined as documented, easy-to-transfer information such as journals, drawings, schematics and internal procedures that is accessible and understood by all organisational members (Fodor 1968). In the large organisation, especially a multi -national company which maintains a high volume of inter-dependent business divisions, including procurement, research and development, sales and marketing, human resources, and manufacturing, each business unit/division maintains expert (tacit) knowledge labourers. Within the large corporation, it is uncommon for individuals that have been hired for their specific skills and capabilities to be cross-trained under a job rotation

Saturday, November 16, 2019

Minimum Wage Essay Example for Free

Minimum Wage Essay American workers will have a 1.75$ increase in their hourly wage by the end of 2015, as President Barack Obama recently called to raise the federal minimum wage from $7.25 an hour $9.00 an hour. This increase in the minimum wage of American citizen aims to help people with a low annual wage: cooks, employees of the janitorial industry and many others working these necessary menial occupations are set to benefit. The white house estimates that this measure will boost the wage of approximately 15 millions low-income workers. Raising the minimum wage, according to the White House press, will have some positive effect for low-income families; however, many companies are opposed to raising the minimum wage. A higher wage will have a direct impact on the cost of business. Some economists argue that higher minimum wage will result in an increased unemployment percentage. Although minimum wage laws can fix hourly pay, they cannot guarantee jobs. Employers are not willing to pay a worker more than the value of the additional product that he produces. For example, if a worker produces 4$ worth of goods per hour and because of the minimum wage he has to be paid 5.15$. Since he cost more than what he produces it makes it hard for him to find a job. At one point in the article, the President said that one of the best ways to get the economy going again is to put money in the pockets of people who work. (Lowrey)It is true that families with low income will earn more money: it is projected that a family that is earning $20,000 to $30,000 a year will see an additional $3,500 in their income. (Lowrey) This general positive outcome of increasing the minimum wage has led many law makers to wrongly assume that increasing the minimum wage is an effective way to fight  poverty. From the point of view of an economist, raising the minimum wage may increases the probability that a poor family will escape poverty through higher wages, but it does increase the probability of another family with average income will become poor as a result of minimum wage giving rise to inflation. It also decreases the proportion of families with income near the poverty line, suggesting that it more will be more difficult to escape poverty. We all know that if the minimum wage increases then the cost of living will inevitably increase as well as a result of inflation. Economists are against minimum wage laws because they create a price floor. In this case, a price floor is not the price that products can be sold for, but what price employers can spend on their employees. For non-economists, legislating a minimum wage is commonly seen as an effective way of giving raises to low-wage workers. Unfortunately it, like any other price floor, creates a surplus. In this case, the surplus is a larger than expected number of workers more of are willing to work in minimum-wage jobs than there are employers willing to hire at that wage. Economists think that there should not be any policies concerning wages: an employee should be paid what the employer thinks he/she deserves. Minimum wage increases make unskilled workers more expensive and therefore undesirable relative to all other factors of production. (Mankiw) For example, if skilled workers make 15$/hour and unskilled workers make three dollars an hour, skilled workers are five times as expensive as the unskilled. Imposing a minimum wage of five dollars an hour makes skilled workers relatively more attractive by making them only three times as expensive as unskilled workers. Another important characteristic of the policy to increase minimum wage that was not discussing in the article is that it may also negatively impact workers by changing how they are compensated. Benefits such as paid vacation, free room and board; inexpensive insurance and subsidized childcare are an important part of the total compensation for many low wageworkers. (Mankiw) When minimum wages rise, employers can control total compensation costs by cutting benefits; such is the case for the United States today. The employer always had to follow the minimum wage in order to pay their employee. The minimum wage should not be existent nowadays; the employer should have the choice to pay their employee based on their knowledge. An employee that knows more and produces more should have an higher hourly range. Sources: Textbook Mankiw, N. Gregory. Principles of Economics. 6th. Mason, OH, USA: 2012. Print. Website: Lowrey, Annie. Raising Minimum Wage Would Ease Income Gap but Carries Political Risks. New York Times. N.p., 13-02-2013. Web. 5 Oct 2013. .

Thursday, November 14, 2019

Women, Sport, and Film :: Sociology Norms Society Essays

Women, Sport, and Film There are two sides to every coin. This is something to keep in mind when examining the topic of gender in sport. Specifically, I am speaking of the costs and benefits of a male or female entering a sport in which he or she is not traditionally accepted for their gender. The two sides to this concept lay not only the individual's sacrifices as the underdog, but also in the benefits the individual encounters on his or her adventure into uncharted territory. Of course, it is a struggle for the individual to become accepted by the sport world, and also the general public. It can be an uphill battle in order for him or her to even be able to participate initially. On the other hand, upon crossing the gender boundary, the individual can earn great recognition. This brings the concept to another level; there are cultural benefits that arise from an individual entering a non-traditional sport for their sex. Three movies that we viewed in the first half of this course have served to demonstr ate the individual costs and benefits involved when women become involved in sports that are not traditionally accepting of the female sex. After close analysis of "Girl Fight", "Pumping Iron II", and "Personal Best", effects that these women have on the female culture as a whole, to this day, become clear. In the movie "Girl Fight", Diana struggles as a female boxer living in the inner city. Because of the abnormality of her involvement in this typically male dominant sport, Diana has a hard time adjusting to the scrutiny she gets from her surrounding culture. This brings up the first social cost she stumbles upon due to her choice. She must remain secretive about her new found love for the sport of boxing. She is excited to have found a coach, a gym, and an outlet for her energy, however she is silenced by the fear of being shunned by her friends and peers, and worse, her dad and brother. As she (inevitably) progressively gains skill in the sport, it becomes harder for her to hide her excitement, and so she invites her best friend and other peers to one of her boxing matches. Another individual benefit for Diana is a social one. By being the only girl involved in boxing, she has potential boyfriends and opportunity for friendships and loves surrounding her.